Add a beautiful, protective finish to your home's concrete and masonry surfaces.
For Best Results:
Surfaces must be properly cleaned and prepped before applying the sealer.
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers
For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone
For coated concrete: refer to: Preparation of Coated Concrete for Sealers
After the surface is cleaned and prepped, apply a thin coat of BEHR PREMIUM® Low-Lustre Sealer with either a nylon-polyester brush, 1/4 - 3/8" nap roller, high quality pad applicator, or a high quality pump sprayer with an adjustable tip.
If the sealer is sprayed, then back roll for uniform thickness. For added durability,additional coats (no more than 4) may be applied.
The sealer will dry to the touch in 1 hour. Allow the first coat to dry for 4 hrs. before deciding if a second coat is needed.
Be sure that the surface is fully cured before use.
Allow 24 hours for light foot traffic.
Allow 72 hours for heavy foot traffic and furniture.
Allow 14 days before subjecting to automotive tires.
Allow 30 days before rinsing and cleaning with a mild detergent.
High Pressure Nozzle
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
Let Pro Referral do the leg work and match you with quality local painters.FIND A PAINTER