Personalize your room with a unique Patch Weave finish.
For Best Results:
Mix the entire quantity of glazing color needed for the project before you start painting. Combining the contents produces uniformity of color. This intermixing is called "boxing."
Paint the base color and allow it to dry completely before glazing.
To prepare your topcoat glaze color, pour 1 part PREMIUM PLUS® Paint (one quart) and 4 parts FAUX GLAZE (one gallon) into a bucket and mix the contents thoroughly. For a more see-through or transparent look, add extra faux glaze to the mixture. For a denser or more opaque glaze color, add more paint to the mixture. The mixture will generally cover approximately 400 sq. ft.
Pour your color glaze mixture into a paint tray and work a 6" mini roller into the glaze until it is fully loaded. To remove excess glaze, roll the tool on the ribbed area of the paint tray.
Starting at a top corner of your project area, roll the colored glaze onto a 3' x 3' section.
Work in small square sections of about 6" x 6". First, drag the whisk broom down a 6" length and then drag it across a 6" width. Then, stop.
While the glaze is wet, continue to the next 6" x 6" section. Repeat the process of dragging the whisk broom down and then across until the 3' x 3' section is complete.
Move to the right and repeat the process again. Overlap and blend each section to avoid hard edges.
Continue these steps until the project is complete.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
Let Pro Referral do the leg work and match you with quality local painters.FIND A PAINTER