The wavy line technique is another faux glaze technique that can impart a fresh and breezy dimension to your home.
For Best Results:
Mix the entire quantity of glazing color needed for the project before you start painting. Combining the contents produces uniformity of color. This intermixing is called "boxing."
Paint the base color and allow it to dry completely before glazing.
To prepare your topcoat glaze color, pour 1 part PREMIUM PLUS® paint (one quart) and 4 parts FAUX GLAZE (one gallon) into a bucket and mix the contents thoroughly. For a more see-through or transparent look, add extra faux glaze to the mixture. For a denser or more opaque glaze color, add more paint to the mixture. The mixture will generally cover approximately 400 sq. ft.
Dip a quality 2"-2½" wide nylon/polyester brush into the color glaze mixture from the bucket. With your brush, paint (cut in) around the perimeter of your working surface. Start at the top corner and continue along the ceiling and around the baseboards.
Pour your color glaze mixture into a paint tray and work a 6" mini roller into the glaze until it is fully loaded. To remove excess glaze, roll the tool on the ribbed area of the paint tray.
Starting at a top corner of your project area, roll the colored glaze down the length of the surface in a 3' wide vertical section.
While the glaze is still wet, drag a whisk broom from top to bottom over the section. Move it slightly from side to side in a wavy motion.
Continue to work in 3' wide vertical sections. Overlap and blend each section as you go to avoid hard edges.
Repeat the process until the project is complete.
Inside or outside; paint or stain: Let’s figure out how much you’ll need to make amazing happen.Calculate
Every project is unique: Keep small wrinkles from becoming big problems by letting the Behr Technical Experts lend a hand.Get Expert Help
Let Pro Referral do the leg work and match you with quality local painters.FIND A PAINTER