CUSTOMIZE & BUY
Tahitian sky
S480-5
Compare
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot

BEHR PREMIUM ADVANCED DECKOVER® Textured

Avg. Rating:

Featuring EVEN BETTER Adhesion and Cracking Resistance!

The new BEHR PREMIUM ADVANCED DECKOVER® TEXTURED resurfaces properly prepared weathered wood and concrete by filling-in cracks and taming splinters, extending the life of your deck and living space so you can enjoy the outdoors. This 100% acrylic formula conceals cracks and splinters up to 1/4". It creates a slip-resistant, waterproof coating that resists cracking and peeling. It's available in 54 solid custom colors, and is great for decks, patios, composite decks, pool decks and walkways.

View ADVANCED DeckOver Textured Colors

DO NOT USE ON DRIVABLE SURFACE SUCH AS GARAGE FLOORS AND DRIVEWAYS.


Finish

Creates a textured, slip-resistant finish

Best for use in

For properly prepared exterior weathered or cracked horizontal and vertical wood, concrete and composite surfaces.

Coverage

1st Coat 75 Sq. Ft; 2nd Coat 75 Sq. Ft.


308486751
PRODUCT USAGE
Paint prep icon

Must Prep
Before Use

Two paint rollers, two coat icon.

2 Coats Required 
 

Wood square feet coverage icon

Horiz. Spread Rate:
1st Coat 75 Sq. Ft
2nd Coat 75 Sq. Ft.

Soap and water cleaning a paint brush icon

Clean-Up
Soap & Water

Recommended for properly prepared interior and exterior weathered or cracked horizontal and vertical wood and composite surfaces such as Decks, Railings, Porches and Boat Docks. Also great for concrete surfaces such as Pool Decks, Patios and Sidewalks. Do not use on drivable surfaces such as garage floors.

Read More

Proper surface preparation is required.

  • Exterior Wood Surfaces: Replace rotting or unstable boards and remove loose splinters.
  • For failing coatings or to remove loose wood fibers, use a product such as BEHR PREMIUM® No. 64 Wood Stain & Finish Stripper followed by BEHR PREMIUM® No. 63 All-In-One Wood Cleaner to neutralize the wood.
  • When No. 64 is not needed, a product such as No. 63 MUST be used to remove mill glaze and clean the wood surface.
  • After using either No. 64 or No. 63, rinse thoroughly with a garden hose or pressure washer.
  • When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface. Allow area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz.
  • Concrete Surfaces: Avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi.
  • Allow new surfaces to cure for 30 days.
  • Use a stripper product to strip peeling coating.
  • Use an etcher product to clean and etch uncoated concrete or No. 990 Concrete & Masonry Degreaser & Cleaner on sound, coated surfaces prior to coating.
Read More

  • Use product when air and surface temperatures are between 50-90˚ F (10-32˚ C).
  • Avoid applying in direct sunlight or to hot surfaces. Do not use if rain is expected within 24 hours. The surface must be completely dry before application.
  • Avoid painting if humidity is expected to be greater than 80%.
  • Intermix multiple containers to ensure color uniformity. Stir product occasionally throughout application.
  • DO NOT THIN PRODUCT. For nail holes and cracks up to 1/4", completely fill in with Textured DECKOVER® coating using a nylon/polyester brush and allow to dry prior to rolling.
  • Deep nail holes and cracks may require additional filling.
  • For edges, corners and in between wood boards, apply using a nylon/polyester brush.
  • Use pressure while rolling and apply a generous, even coat using a 1/2" nap roller.
  • For a smoother texture, use a brush or thinner nap roller (i.e. 1/4").
  • For vertical surfaces such as railings, use a nylon/polyester brush or roller and apply two thin coats at a spread rate of 400 sq. ft. per gallon.
  • Do not use with airless sprayer.
  • For optimum performance, film uniformity, leveling and to cover cracks, a second coat MUST be applied.
  • Maintain a wet edge when applying.
Read More

  • 4-6 hours before recoat. Dries to touch in 4 hours.
  • Wait 24-48 hours before light foot traffic. 72 hours to full cure.
  • Additional dry time may be needed in cooler temperatures and higher humidity.
  • Premature heavy traffic will cause coating failure.
Read More

  • For disposal of empty containers and unused product, contact your household refuse collection service.
Read More

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 178ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
How-To

Find step-by-step instructions in our how-to articles and videos.

Often Bought Together
BEHR PREMIUM<sup>®</sup> All-In-One Wood Cleaner
BEHR PREMIUM® All-In-One Wood Cleaner
Learn More
BEHR PREMIUM<sup>®</sup> Wood Stain & Finish Stripper
BEHR PREMIUM® Wood Stain & Finish Stripper
Learn More
MSDS AND DATA SHEET

WARRANTY

For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Never miss out on the hottest deals and latest news from BEHR.

Please enter email address.
Please enter email address.